Latest Listings

  • 5" B1 Springbok Castings
    5" B1 Springbok Castings
    5" gauge locomotives and parts - Basingstoke (Hampshire) - October 25, 2020 Pound £700

    Due to lack of space (and time!) I have decided to sell all the parts I acquired to start building a Martin Evans Springbok. All the parts included are shown in the photographs but include; Smokebox ring & door Chimney Pair of Bronze cylinders + ...

  • 5 inch gauge CASTLE DRAWINGS
    5 inch gauge CASTLE DRAWINGS
    5" gauge locomotives and parts - Cheltenham (Gloucestershire) - October 22, 2020 Pound £60

    A complete set of Drawings for a PETE RICH Castle locomotive, They have never been used, They have been sitting for a long time and the drawings have age marks on the fold line as in the picture. £60.00 +post

  • 3.5" Britannia Kit
    3.5" Britannia Kit
    3½" gauge locomotives and parts - Heathfield (East Sussex) - October 22, 2020 Pound £500

    I have 3 x part built 3.5" Brits all at the same stage that I am selling for a friend who's father was building them. I have been through everything and all kits have the same items except 1 which is short of a firebox ring and a boogie. They may wel...

  • 0-8-0 small gauge loco and parts
    0-8-0 small gauge loco and parts
    Other model railway items - Halifax (West Yorkshire) - October 16, 2020 Pound £120

    a very well made small gauge 0-8-0 air running chassis and water tube boiler, not sure of the gauge but it measures (about) one and five eighths inches across the wheel flanges, tender is one and an eighth inches across the wheel flanges, asking one ...

  • 5" L B S C Pansy
    5" L B S C Pansy
    5" gauge locomotives and parts - Cemaes Bay (Wales) - October 6, 2020 Pound £5,000

    This is my 5" Pansy of which I am selling due to a recent move to Anglesey (Wales) Nearest club is to far away. The engine has a injector, hand pump, axle pump. It had a new boiler, rebuild and paint job about two years ago. I was back in Manchester ...

  • 1.6 Brass sheet 1200 x 600 mm
    1.6 Brass sheet 1200 x 600 mm
    Other model railway items - Leicester (Leicestershire) - October 5, 2020 Pound £175

    1.6 Brass sheets 1200 x 600 mm 2 off ,bought to do some cab work ,now surplus to requirements,heavy so pick up only from LE3 open to sensible offers will split if needed contact me for size needed

  • 2-8-2 canadian national loco
    2-8-2 canadian national loco
    5" gauge locomotives and parts - Cambridge (Cambridgeshire) - September 30, 2020 Free

    more photos off the 2-8-2 canadian national loco

  • 2-8-2 canadian national loco
    2-8-2 canadian national loco
    5" gauge locomotives and parts - Cambridge (Cambridgeshire) - September 30, 2020 Pound £10,000

    more photos off the 2-8-2 canadian national loco

  • Sweet Pea 5” Gauge
    Sweet Pea 5” Gauge
    5" gauge locomotives and parts - Northampton (Northamptonshire) - September 30, 2020 Pound £3,950

    Black Sweet Pea 5” Locomotive Run only on club days for one season Annual steam test just completed in September so valid until 24/09/2021 Hydraulic test valid until October 2022 Comes with paperwork Hand pump, Axle pump, injector fitted to engine. G...

  • 3 1/2 Martin Evans Conway
    3 1/2 Martin Evans Conway
    3½" gauge locomotives and parts - Manchester (Great Manchester) - September 29, 2020 Pound £3,250

    I have decided after a long hard think yo sell my 3 1/2 gauge Martin Evans Conway, the only reason being is that I do not use it. When I got the loco it was just as every other Conway, so to be different I stripped it and made it look as much like an...

  • Virginia (chassis)
    Virginia (chassis)
    3½" gauge locomotives and parts - Halifax (West Yorkshire) - September 27, 2020 Pound £40

    Part built Virginia chassis, cylinders attached, eccentrics on axle, grubby but could easily clean up collection only

  • 2-8-2 canadian national loco
    2-8-2 canadian national loco
    5" gauge locomotives and parts - Cambridge (Cambridgeshire) - September 25, 2020 Free

    new hyd.& steam test sept.2020.copper boiler.fitted with twin axle pumps,injector,tender hand pump,boiler feed pump,steam generator for headlights & a great whistle.runs and drives great with bags of power

  • Southworth corliss steam engine castings
    Southworth corliss steam engine castings
    Other steam models - Hull (East Yorkshire) - September 22, 2020 Check with seller

    Wanted Southworth corliss engine castings or similar. Will pay cash. Ph 07866599602

  • 7 1/4 LSWR Radial Tank
    7 1/4 LSWR Radial Tank
    7¼" gauge locomotives and parts - Birmingham (West Midlands) - September 20, 2020 Pound £15,000

    LSWR Adams ‘Radial Tank’ locomotive in 7 1/4″ gauge built to the Dick Stockings design. Very well finished in LSWR Green lined out in black & white as worn by the Bluebell Railway’s sole surviving example of the Class, No.488 The model was profes...

  • 5" gauge points
    5" gauge points
    Other model railway items - Grays (Essex) - September 19, 2020 Pound £360

    5" Gauge points with 16mm rail made to order. Machined blades and check rails, laser cut steel frog. Tanalised and stained wooden sleepers. Price includes steel point lever and mechanism, all set up and ready to go. Lead time normally 2-3 weeks from ...

  • 7 1/4” Bridget Tank Locomotive
    7 1/4” Bridget Tank Locomotive
    7¼" gauge locomotives and parts - (Scotland) - September 18, 2020 Pound £5,495

    Built to a high standard, copper silver soldered boiler, self tested and steamed last week, runs beautifully in both forward and reverse, injector, axel pump, hand pump, remote drain cocks, mechanical lubrication pump, scale steam whistle, rocking as...

  • 3” Scale Allchin Traction Engine
    3” Scale Allchin Traction Engine
    Other steam models - Inverness (Scotland) - September 18, 2020 Pound £10,995

    This is a large engine in 3” scale, Built to the highest standard throughout, exhibition winning quality, steamed once to prove, copper/silver soldered boiler. Built be an extremely talented South African Builder, Runs on compressed air like a very p...

  • Ajax
    Ajax
    5" gauge locomotives and parts - Leeds (West Yorkshire) - September 14, 2020 Free

    5 gauge ajax with new boiler been run on air £3300 call Dane on 07411465648

  • 7 1/4'' Jessie Chassis
    7 1/4'' Jessie Chassis
    7¼" gauge locomotives and parts - Highland (Scotland) - September 6, 2020 Pound £500

    For sale a part built Jessie Chassis. Cylinders, wheels, motion, frames, well built.

  • 7 1/4 steam part built King
    7 1/4 steam part built King
    7¼" gauge locomotives and parts - Highland (Scotland) - September 6, 2020 Pound £500

    Hi, A well built part built king, Frames drilled and pressed to clear bogie wheels, horns fitted, tender frames drilled, tender and bogie wheels, frames stretchers, axleboxes, axles,spring hanger brackets, crank webs, bogie frames and centre casting.

  • Full workshop for Sale
    Full workshop for Sale
    Tools and machinery - Hull (East Yorkshire) - September 4, 2020 Pound £123,456

    Due to other projects complete model engineering workshop for sale. Walco major milling machine with digital outputs and CNC . Chester 918 lathe with trays and cabinets full of tooling for both machines. Tool cabinets full of Brass/Phosphor Bronze /s...